Starting WinAgents RouterTweak from the command line

You can start WinAgents RouterTweak from the Windows command line passing the following parameters to the program:

rtweak device_address [-n] [-u username] [-p password] [-e enable_password] [-s] [-r]

rtweak -c com_port [-u username] [-p password] [-e enable_password] [-r]

Command line parameters:

device_address - the DNS name or IP address of the device

com_port - the name of the COM port for connecting to the device.

-n - do not use the parameter from the connection history for connecting to the device.

-u username - username for authenticating on the device.

-p password - the password for authenticating on the device.

-e enable_password - the password for switching to the privileged mode.

-s - use the SSH protocol for connecting to the device (otherwise the TELNET protocol will be used).

-r - automatically retrieve the running configuration after the connection to the device is established.

-ё - connect to the device via the COM port (the default port settings are used).